RIDGID SeeSnake Standard
The RIDGID SeeSnake Standard is a rugged drain and sewer inspection camera reel with TruSense technology, intended for 2 in. to 12 in. lines and runs up to 200 ft. or 325 ft. depending on the cable assembly. It uses a 1.365 in. (35 mm) camera head with an HDR image sensor and high-intensity LEDs, plus a 512 Hz FleXmitter sonde for locating. The reel weighs 53 lbs. without a monitor, has a 32 in. frame, and pairs with CSx series monitors (sold separately); TiltSense shows camera pitch on a connected CSx monitor.
What a used RIDGID SeeSnake Standard sells for
No sales data yet. The first listing sets the mark.
RIDGID SeeSnake Standard specs
Sonde512 Hz FleXmitter
Weight53 lbs. (without monitor)
ImagingHigh Dynamic Range (HDR) image sensor
LightingHigh-intensity LEDs
Camera HeadSelf-leveling (certain models)
Maximum Run200 ft. or 325 ft.
Camera Length1.68 in.
Line Capacity2 in. - 12 in. pipe
Camera Diameter1.365 in. (35 mm)
Compatible MonitorsCS6x, CS6xPak, CS65x, CS12x
Push Cable Diameter0.44 in.
Reel Frame Diameter32 in.
Operating Temperature-4 to 104 degrees F
From the RIDGID SeeSnake Standard spec sheet (RIDGID SeeSnake Standard Camera with TruSense ↗), same series as the exact model. Check the nameplate on the unit.
No RIDGID SeeSnake Standard listed right now
Be the first to list one.
Selling a SeeSnake Standard?
Free to list. Buyers pick up locally and pay you directly. Your first listings get a free boost.
List your SeeSnake Standard